Lights
Embedded Files
Rear lightbar with DRLs - mode 1
RISK Low
COMPLEXITY Low
TESTED 992.1 MY20
Start Diagnostics, go to Overview screen
Select CU - BCM1 (Body Control Module 1) [0x9]
Press Coding programming
Select Manual coding without coding rules (development)
CU - BCM_1_BOSCH_AU651_015
Select Kodierwert
Press F12
Set CV - drl_at_indication_config to FULL_AVAILABLE
Set CV - drl_at_sl to ACTIVE
Set CV - drl_available to ACTIVE
Set CV - drl_break to ACTIVE
Set CV - drl_mmi to ACTIVE
Set CV - sl_at_drl to ACTIVE
Press F8 to WRITE
#lightbar #DRLs #daylightrunning #lights
Rear lightbar with DRLs - mode 2
RISK Low
COMPLEXITY Low
TESTED 992.1 MY20
Start Diagnostics, go to Overview screen
Select CU - BCM1 (Body Control Module 1) [0x9]
Press Coding programming
Select Manual coding without coding rules (development)
CU - BCM_1_BOSCH_AU651_015
Select Kodierwert
Press F12
Set CV - drl_at_indication_config to FULL_AVAILABLE
Set CV - drl_at_sl to NOT_ACTIVE
Set CV - drl_available to ACTIVE
Set CV - drl_break to NOT_ACTIVE
Set CV - drl_mmi to NOT_ACTIVE
Set CV - sl_at_drl to ACTIVE
Press F8 to WRITE
#lightbar #DRLs #daylightrunning #lights
One touch turn signal
RISK Low
COMPLEXITY Low
TESTED 992.1 MY20
Start Diagnostics, go to Overview screen
Select CU - BCM2 (Body Control Module 2) [0x46]
Press F12
Pre-selected CU - BCM2_MLBevo_HellaConti_PO 015 [0x46]
Press Coding programming
Select Manual coding without coding rules (development)
Press F12
Select CV - Flasher_light_control
Press F12
Select CV - Flasher_light_control: Motorway_flashing_flashing_cycles
Change value (positive whole number 0-255)
Press F8 to WRITE
#lights #turnsignal #onetouch #indicator #motorway #flashing
Lock/Unlock flashes
RISK Low
COMPLEXITY Low
TESTED 992.1 MY20
Start Diagnostics, go to Overview screen
Select CU - BCM2 (Body Control Module 2) [0x46]
Press F12
Pre-selected CU - BCM2_MLBevo_HellaConti_PO 015 [0x46]
Press Coding programming
Select Manual coding without coding rules (development)
Press F12
Select CV - Flasher_light_control
Press F12
Select CV - Flasher_light_control: ***_unlock_central_locking_flashing_cycles
Change value (positive whole number 0-255)
CV - Flasher_light_control: ***_lock_central_locking_flashing_cycles
Change value (positive whole number 0-255)
Press F8 to WRITE
#lights #lockflash #unlockflash #lock #unlock #indicator
Page updated
Google Sites
Report abuse