Kombi
Embedded Files
Driver seatbelt chime disable
Disable the warning chime for the driver's side seatbelt but keeps the warning icon active (Fond Icon Anzeigen).
RISK Low
COMPLEXITY Low
TESTED 992.1 MY20
Start Diagnostics, go to Overview screen
Select CU - Kombi [0x17]
Press Coding programming
Select Manual coding without coding rules (development)
Press F12
Select Gurtwarnung
Press F12
CV - Gurtwarnung: Front Gurtwarnung Fahrer to NICHT AKTIV
Press F8 to WRITE
Instrument Cluster reboots
note: the same is possible for the passenger, see CV - Gurtwarnung: Front Gurtwarnung Beifahrer
#instrumentcluster #seatbelt #chime #kombi #gurtwarnung #driver
Speedometer tip colour
Changes the speedo tip colour between white and red.
RISK Low
COMPLEXITY Low
TESTED 992.1 MY20
Start Diagnostics, go to Overview screen
Select CU - Kombi [0x17]
Press Coding programming
Select Manual coding without coding rules (development)
Press F12
Select Kodierwert
Press F12
CV - Kodierwert: Codierbyte 02 Farbe Geschwindikeitszeiger to weiß / rot
CV - Kodierwert: Weitere Kodierungen IV Tacho Zeigeffarbe to weiß / rot
Press F8 to WRITE
Instrument Cluster reboots
note: both need to be set to the same value. Green doesn't seem to work. On early 992.1 models the tip remain short, later models have a full needle
#instrumentcluster #speedometer #colour #kombi #needle #tip
GT3 Track View
Enables the 'reduced' track view only available on GT models. Slightly different displays between the three GT3 model selections.
RISK Low
COMPLEXITY Low
TESTED 992.1 MY20
Follow the steps to configure the Instrument Cluster Welcome graphic to GT3, GT3RS or GT3 ST3
Turn the right rotary knob on the steering wheel
Select Press to Show when presented with the GT3 screen option
note: GT3 ST3 is the GT3 with Touring Package
#instrumentcluster #reduceddisplay #colour #kombi #needle #tip
Disable Driving Mode popup
On Sport Chrono equipped models - disable the mostly unnecessary 5-second pop up screen on the cluster when changing driving modes via the steering wheel dial.
RISK Low
COMPLEXITY Low
TESTED 992.1 MY20
Start Diagnostics, go to Overview screen
Select CU - Kombi [0x17]
Press Coding programming
Select Manual coding without coding rules (development)
Press F12
Select Kodierwert
Press F12
CV - Kodierwert: Anzeigedauer Charisma Mode Popup
Change value to less than 1000 (1 second)
Press F8 to WRITE
Instrument Cluster reboots
#instrumentcluster #drivingmode #popup #popuptime #kombi
Change Speedometer scale
Change the scale and max on the speedometer dial.
RISK Low
COMPLEXITY Low
TESTED 992.1 MY20
Start Diagnostics, go to Overview screen
Select CU - Kombi [0x17]
Press Coding programming
Select Manual coding without coding rules (development)
Press F12
Select Kodierwert
Press F12
CV - Kodierwert: Bytefield 3 Tachometerskala
Pick max speed value from list - e.g., 270 / 300 / 330 / 350km/h
Press F8 to WRITE
Instrument Cluster reboots
#instrumentcluster #tacho #speedometer #scale #maxspeed #kombi
Enable Expert Menu
Enable the Expert Menu on the instrument cluster, accessed by pressing the steering wheel right selector wheel.
RISK Low
COMPLEXITY Low
TESTED 992.1 MY20
Start Diagnostics, go to Overview screen
Select CU - Kombi [0x17]
Press Coding programming
Select Manual coding without coding rules (development)
Press F12
Select Kodierwert
Press F12
CV - Kodierwert: Weitere Kodierungen III Expertenmenü permanente Aktivierung to aktiv
Press F8 to WRITE
Instrument Cluster reboots
note: this menu has a Software Reset item, it is not known what this does and therefore not recommended to experiment!
#instrumentcluster #expertmenu #geekmenu #expert #menu #kombi
Heritage Green dials
Enable the instrument cluster Heritage Green (911 Sport Classic & 911 Targa Heritage Edition) dial text and accents whilst still maintaining your chosen Instrument Cluster Welcome graphic.
RISK Low
COMPLEXITY Low
TESTED 992.1 MY20
Start Diagnostics, go to Overview screen
Select CU - Kombi [0x17]
Press Coding programming
Select Manual coding without coding rules (development)
Press F12
Select Werkeinstellung
Press F12
CV - Werkseinstellung: Werkseinstellung SkinConfig Skin4 to supported
CV - Werkseinstellung: Werkseinstellung ActiveSkin to Skin4
Press F8 to WRITE
Instrument Cluster reboots
Back to Overview screen
Press Coding programming
Select Manual coding without coding rules (development)
Press F12
Select Benutzerkonten
Press F12
CV - Benutzerkonten: Benutzer 1 ActiveSkin to Skin4
optional: do this for each user (benutzer) profile e.g., Benutzerkonten: Benutzer 2 ActiveSkin
Press F8 to WRITE
Instrument Cluster reboots
note: the main analogue tacho text and needle colours do not change, they remain as installed and are not known to be configurable
#instrumentcluster #heritage #green #SportClassic #kombi #colour
Instrument Cluster Welcome graphic
Change the 911 model graphic on the instrument cluster start screen which also enables dial colours and additional cluster screes depending on the chosen model.
RISK Low
COMPLEXITY Low
TESTED 992.1 MY20
Start Diagnostics, go to Overview screen
Select CU - Kombi [0x17]
Press Coding programming
Select Manual coding without coding rules (development)
Press F12
Select Kodierwert
Press F12
CV - Kodierwert: Welcome Screen Karrosserieform
Pick model from list - e.g., GT3RS / GT3 / GT3 ST3 / Turbo S / Sport Classic
Press F8 to WRITE
Instrument Cluster reboots
note: GT3 ST3 is the GT3 with Touring Package
#instrumentcluster #welcome #screen #kombi #karrosserieform #graphic
Page updated
Google Sites
Report abuse